Page 182 Setting Preferences for Your Co mmunicator
To enter a permanent IP address:
1. Tap the IP Address check box to deselect it and display a permanent IP address field below
the check box.
2. Tap the space to the left of the first period then enter the first section of the IP address.
N
NN
No
oo
ot
tt
te
ee
e:
::: Each section must be a number from 0 to 255.
3. Tap and enter the remaining sections of the IP address.
4. Hold Option and press Return to finish.
Creating a login script
A login script is a series of commands, similar to an autoexec.bat file, that automates logging into
your ISP. You can create lo gin script files by selectin g commands from the Com mand pick list in
the Login Script dialog. Some c ommands from the Command pick list, such as Send, require you
to supply additional information. Those commands have a parameter field so that you can add the
necessary data.
N
NN
No
oo
ot
tt
te
ee
e:
::: You can also use non-ASCII and literal characters in your login script. See Appendix C
for more information.
To create a login script:
1. Tap Script.
2. Tap the End pick list.
3. Tap the command you want from the Command list. If the command requires additional
information, a field appears to the right of it for you to enter the information. The following
commands are available:
Wait For Tells your communicator to wait for specific characters from the TC P/IP
server before executing the next command.
Wait For
Prompt
Detects a challenge-response prompt from the server and displays a
dynamically generated challenge value. When you enter the challenge value
into your token card, this generates a response value for you to enter on your
communicator. This command takes two arguments, separated by a vertical
bar (|) on the input line.
Tap here