Chapter 1 Page 13
8. If you created a password on your old handheld, enter it on your new commu nicator.
Note: Re cords you previously marked Private remain marked Private, but you need to reenter a
password on your new communicator.
9. If you had any important settings on your old handheld, such as Network Pre ferences,
manually copy them from your old handheld to your new communicator.
Each device must have a unique name
After you complete the upgrade process described above, you have two devices with the same
name. This is an undesirable situation. Each device must have a unique name in order to prevent
unexpected results during HotSync operations and other complications.
We strongly recommend that you perform a hard reset on your old handheld. See page 203 for
details.
A hard reset not only erases all data from the old handheld; it also erase s the name and makes
that handheld a clean slate, ready to receive a new name. The next time you perform a HotSync
operation with this old handheld, you are asked to give it a name. Be sure to give it a unique name.
Treo components
Locating front panel controls
Speaker
Rocker switch
Headset jack
Scroll buttons
Microphone
Screen
Keyboard
Application
buttons
Contrast/
Brightness control
Option key