28
Switching Source Signals
Press the SOURCE button on the
remote control or the SOURCE button
on the control panel to select the
incoming source signal.
The current source setting CH xx
appears on the top left corner of the
screen, AV1 or AV2 appears on the
bottom right corner of the screen.
Note:
The TV supports S-Video input in addition to normal video and audio sig-
nals. The TV detects the signal type automatically and gives priority to S-
video when two signals are detected at the same time. This auto detection
function is only available for AV2.
Adjusting the Volume
Press the VOL UP button to increase
the volume. Press the VOL DOWN
button to decrease the volume. The
volume level is displayed on the TV.
Press the MUTE button on the remote
control to turn the sound off. The
word “Mute” appears on the top left
corner of the screen and sound is
temporarily turned off.
Press the MUTE button on the remote
control or press the VOL UP button or VOL DOWN button to restore
the original volume.
SOURCEMENU
volume
channel
TV/AV
Current source setting
SOURCE
CH 40
AV
SOURCEMENU
volume
channel
Volum e up
Volume down
Mute