56
Situation Solution
No picture and sound.
Connect the power cord properly.
Press the POWER button on the control panel or
remote control.
Press the SOURCE button to cycle through con-
nected video sources.
Press CH UP or CH DOWN to switch to other TV
stations.
Check the TV/CATV OSD settings. See “TV/CATV”
on page 43.
Make sure all cables are connected properly.
No picture, or poor picture,
sound is OK.
Check the ANT and cable connections.
Adjust the brightness in the OSD menus. See
“Brightness” on page 30.
Picture is not in color. Adjust the saturation in the OSD menus. See “Satu-
ration” on page 34.
Picture is OK, no sound.
Press the VOL UP button on the control panel or
remote control.
Make sure the MTS option is set to Main or Dual.
See "MTS" on page 29.
One of the speakers has no
sound.
Adjust the balance in the OSD menus. See “Bal-
ance” on page 40.
Can’t receive some TV chan-
nels using cable TV.
Try the Auto Program function in the OSD “TV Set-
ting” menu. See “Auto Program” on page 45.
Want to reset TV settings. Use the Reset function in the OSD “Miscellaneous”
menu. See “Reset” on page 54.
Cannot operate menus.
If OSD items are colored light blue, the system is in
a state such that those settings are not available.
For example, video setting is available in TV mode.
No image but have sound. Make sure the video signal cable is connected
properly.
Troubleshooting
13