MOWER MAINTENANCE
To prevent accidents stop the engine and disconnect the spark plug lead before attempting to carry out maintenance procedures on the mower.
Engine
1.Finger Guard
2.Carburettor
3.Spark Plug / Lead
4.Exhaust Guard
5.Exhaust
6.Oil filler Cap/ Dipstick
7.Start Grip
8.Fuel Cap
10.Air Cleaner
7
8
1
6 9
3D319R08
2
5
3
4
Throttle Cable Adjustment
Loosen the outer cable clamp screw (1) and move the governor control | 2 | |
3 | ||
lever (2) to the left as far as possible. Insert a large, flat blade screw | ||
1 | ||
driver (3) into the slot in the engine control bracket (4) at the angle | ||
shown. Push the governor control lever to the right until it just touch- |
| |
es the screw driver blade. Move the throttle control lever to the ‘fast’ |
| |
position (not the ‘choke’ position) and | 4 | |
screw. Replace the engine cowl. |
Carburettor Adjustments
Should only be made by an authorised Briggs & Stratton dealer. Under no circumstances should the engine be adjusted to run at a speed in excess of that shown on the Declaration of Conformity.
1.21