1.19 | OPERATING THE MOWER | 1.19 |
SAFETY NOTICE Continued
WARNING: PREVENT ACCIDENTS Before mowing, thoroughly inspect the area where the mower is to be used and remove all stones, sticks, wires, bones and other foreign objects, which when contacted by the mower cutterbar could become dangerous projectiles.
Inspect the area for hidden obstructions which when contacted by the cutterbar could risk health and safety. Remember the location of these obstructions and ensure that you mow around them.
CS031
CAUTION: Prevent engine damage - DO NOT use the mower on a slope greater than 20 degrees.
20
MAX.
CS080
HEIGHT OF CUT
To adjust the height of cut : Grip the lever and pull sideways to disengage it from the locking notch, then push forwards to raise or pull backwards to lower the height of cut. Finally release the lever at the required position and ensure it locks firmly into one of the eight setting notches.
Always select a height of cut to suit operating conditions.
Aim to prevent engine overloading and blockages by avoid- CS219 ing low cuts in long grass conditions. Be prepared to make
two cuts when the grass is long.