ASSEMBLING THE MOWER
Delivery Checklist
Remove the mower from the packaging and check that the following items have been supplied correctly. If any items are missing contact, your local Hayter dealer.
1.Engine Handbook.
2.Grassbag.
To prevent accidents cut off the long ribbon attached to the grass- bag and discard.
Handlebar
Unscrew the handlebar securing knobs sufficiently to allow the handle- bar to pivot. Hold the engine stop lever in towards the handlebar and unfold the handlebar to the operating position, before releasing. Tighten both handlebar knobs to secure in position.
Take care to ensure that the control cables do not become snagged at the pivot point.
Adjust Handlebar Height
Unscrew the two larger knobs at base of handlebar sufficiently to allow it to be moved to the upper, middle or lower position. Ensure both sides are set to the same height and secure in the required position.
Grassbag Attachment
Raise the rear deflector, lower the grassbag through the handlebar and hook in position. Lower the deflector to rest on the grassbag
1.12