ASSEMBLING THE MOWER

Delivery Checklist

Remove the mower from the packaging and check that the following items have been supplied correctly. If any items are missing contact, your local Hayter dealer.

1.Engine Handbook.

2.Grassbag.

To prevent accidents cut off the long ribbon attached to the grass- bag and discard.

Handlebar

Unscrew the handlebar securing knobs sufficiently to allow the handle- bar to pivot. Move the engine stop lever away from the engine to avoid damage and unfold the handlebar to the operating position. Make sure the knobs are assembled to the outside of the handlebar and tighten to secure in position.

Take care to ensure that the control cables do not become snagged at the pivot point.

Adjust Handlebar Height

Unscrew the two handlebar securing Knobs to release the handlebar brace then loosen the two nyloc nuts at the base of the handlebar sufficiently to allow it to be moved to the upper, middle or lower position. Re-attach the handlebar brace in relevant hole for best position and comfort. Ensure that both sides are set to the same height. Tighten both the nyloc nuts and knobs to secure the handlebar in place.

Grassbag Attachment

Raise the rear deflector, lower the grassbag through the handlebar and hook in position. Lower the deflector to rest on the grassbag

1.12