1.51 | MAINTENANCE | 1.51 |
EVERY 50 HOURS | Continued. |
Grease pivot points : Clean and grease all grease points with a good quality compound of the grade specified, refer -
SPECIFICATIONS.
Replace any grease nipples which are damaged.
Grease all cutterhead grease points and ensure that sufficient grease is injected such that clean grease is seen to escape from the roller end caps. This provides visible evidence that the roller seals have been purged of grass debris etc. and will ensure maximum working life.
GREASE POINTS | DAILY |
DAILY (IF FITTED)
50 HOUR (WEEKLY)
924916KG251004