1.65

TROUBLE SHOOTING

1.65

TROUBLE SHOOTING

When using the following chart it may be found that overhaul of major components or hydraulic pressure adjustments are necessary. In this case it is recommended that your dealer make these repairs as he is properly equipped to do this work.

WARNING: PREVENT ACCIDENTS - ALWAYS Apply the parking brake, switch off the engine and remove the ignition key before attempting to work on the mower.

PROBLEM

POSSIBLE CAUSE

REMEDY

 

 

 

 

Engine will not start

Transmission neutral interlock switch

Remove foot from for-

with ignition key.

not energised.

ward/reverse pedals.

 

 

Check setting of transmis-

 

 

sion neutral interlock switch.

 

Parking brake interlock switch not ener-

Operate

parking

brake

 

gised.

lever to the ON position

 

 

Check setting of

parking

 

 

brake interlock switch.

 

Cutterhead drive interlock switch not

Move

cutterhead

drive

 

energised.

switch to the ‘OFF’position.

 

 

Check setting of cutterhead

 

 

interlock switch.

 

 

Faulty electrical connection.

Trace and correct fault.

For all other engine problems, refer - ENGINE HANDBOOK.

Flat Battery.

Terminal connection

Clean and tighten terminal

 

loose or corroded.

connections.

 

 

 

Recharge battery.

 

Loose or defective

Re-tension or replace drive

 

alternator belt.

belt,

refer

- ENGINE

 

 

HANDBOOK.

 

Defective battery.

Recharge battery.

 

 

Replace battery.

 

Electrical short circuit.

Trace

short

circuit and

 

 

make good.

 

924916KG251004