1.15 | STARTING THE ENGINE | 1.15 |
STARTING THE ENGINE
Operate the primer bulb: Push on the primer bulb 5 times at two second intervals to provide the extra fuel to start the engine after assembling the mower for the first time.
In normal use, push on the primer bulb 3 times at two second intervals to provide the extra fuel required to start a cold engine. Operation of the primer bulb is usually unnecessary when starting a warm engine.
1
CS231
Operate the throttle control lever: Push the lever to the fast position.
CS212
Operate the engine stop lever: Use one hand to hold the engine stop lever in the operating position firmly against the handlebar. To start and operate the engine the engine stop lever must be held in the operating position. If the engine stop lever is released the engine will stop.
CS214
Operate the engine start - grip: Stand behind the mower and |
|
maintain a firm hold on the handlebar and the engine stop lever |
|
to prevent the mower moving towards you. Use your right |
|
hand to hold the engine |
|
resistance is felt, then pull rapidly to crank the engine. When |
|
the engine starts carefully return the engine |
|
storage position. If the engine does not start after 5 attempts - | CS213 |
refer to "Fault Finding". |
|
IMPORTANT: Prevent engine damage. Never pull the engine
396007AMT1004020