3.To change the code, either:
•Add a jumper to the same location on both the push button and the chime or...
•Remove a jumper from the same location on both the push button and the chime or...
•Move a jumper on the push button from one location to another. Move the corresponding jumper on the chime to match the new location in the push button.
Example: Move jumper at location “1” to location “2” on both the push button and the chime.
Note: Code positions 1 through 3 must be exactly the same for both the push button and chime for this system to function.
Note: Unit will come factory set with jumpers in locations 1, 2, and 3 on the push button and on the chime (see Figure 7).
The range of the wireless chime can vary with location, temperature, and battery condition.
A B C 1 2 3
Inside Chime
*Code Settings
Must Match Both Push
Button and Chime
123 |
Inside Push |
Button |
Note: Some models might require the use of tweezers to remove and replace the jumpers.
Figure 7
|
