WARNING

Handle glass with care.

Inspect the gasket to ensure it is undamaged.

Inspect the glass for cracks, chips or scratches.

Do NOT strike, slam or scratch glass.

Do NOT operate appliance with glass assembly removed, cracked, broken or scratched.

Replace glass assembly as a complete assembly.

G.Replace Glass Assembly

Set the glass panel on the lower two or four glass assembly latches, ensuring the glass panel is centered in the opening.

Pull out and latch all four or seven glass assembly latches into the groove on the glass frame.

H. Install Clean Face Components

Carefully remove components from skin pack. See Figure

12.3for identification of components.

Bottom Latch Cover

Top Latch Cover

Hood

Firescreen

Firescreen Rod

(Lower Floor Cover-not shown-

 

shipped underneath)

 

Figure 12.3 Clean Face Components/Skin Pack

Install Hood

Bend screen rod tabs down at a 90-deg. angle. See Figure 12.4.

Figure 12.4 Screen Rod Tab

Install above the glass panel.

Hood must be attached or a fire hazard may result.

Locate the four screws just inside the upper section of the appliance.

Position hood and slide notches over screw heads.

Tighten the four screws.

See Figure 12.5.

Figure 12.5 Installing the Hood

Install Top Latch Cover

Insert top latch cover tabs into slots. See Figure 12.6.

Rotate top latch cover down till the tabs lock in place.

Slot

Top Latch

Cover Tab

Figure 12.6 Installing Top Latch Cover

26

Heatilator • Novus BV-Mesh4031-553 Rev F • 11/07

Page 26
Image 26
Heatiator NB4842MI, NB4236MI Replace Glass Assembly, Install Clean Face Components, Install Hood, Install Top Latch Cover

NB3933M, NB3630M, NB3630MI, NB3933MI, NB4236M specifications

The Heatiator series of gas fireplaces, including the models NB4236MI, NB4842MI, NB3933M, NB4236M, and NB3933MI, epitomizes modern heating technology with a focus on efficiency, design, and user comfort. These models are engineered to provide warmth while enhancing the aesthetic appeal of any living space.

One of the standout features of the Heatiator series is its advanced combustion technology. The fireplaces are designed to maximize heat output while minimizing emissions. This is achieved through high-quality burners that ensure a clean and efficient flame, allowing users to enjoy the ambient glow without compromise. The models boast impressive thermal efficiencies, meaning they convert a high percentage of the fuel consumed into usable heat, which is an essential factor for eco-conscious consumers.

Design flexibility is another key characteristic of the Heatiator fireplaces. The models in this series come in various sizes and styles, offering options that can blend seamlessly into any decor. Whether you prefer a traditional look or a more contemporary aesthetic, there’s a model to suit your taste. The large viewing areas provided by the glass front panels offer an unobstructed view of the flame, adding a cozy ambiance to your home.

The Heatiator NB4236MI and NB4842MI models feature innovative multi-function remote controls, giving users the convenience of adjusting settings from anywhere in the room. This built-in technology not only enhances user experience but also contributes to energy savings by allowing precise control over the fireplace's operation.

Safety is also a priority with the Heatiator lineup. Equipped with features such as an automatic shut-off system and tempered glass fronts, users can enjoy peace of mind knowing that safety is paramount.

In terms of customization, these models offer various finishes and log options, allowing homeowners to personalize their fireplaces to match their style and preferences.

Overall, the Heatiator NB4236MI, NB4842MI, NB3933M, NB4236M, and NB3933MI represent a perfect blend of technology, safety, and design sophistication, making them an excellent choice for anyone looking to add a reliable and attractive heating solution to their home. Whether for supplemental heat or a primary heating source, these fireplaces are built to deliver exceptional performance in any setting.