RECORDING
•To prevent tape damage, after five minutes, the TV/VCR will automatically return to the Recording mode.
•When in the Pause/Still mode, a display showing 5 "" marks will appear on the screen. Each "" mark represents one minute of Pause time. You may refer to this display for remaining pause time available.
•If "CAPTION1", "CAPTION2", "TEXT1" or "TEXT2" is selected, the On Screen Display will appear for 5 seconds, then disappear.
If you want to check the remaining pause time available using the On Screen Display, press SELECT button. The On Screen Display will appear for 5 seconds.
OTR (One Touch Recording)
This function enables you to set a recording length simply by pressing the REC/OTR button on the TV/VCR.
Make sure...
•Power must be turned on.
•Insert a cassette tape with its erase prevention tab in place. (If necessary, rewind or fast forward the tape to the point at which you want to begin recording.)
NOTE: This function cannot be done by the remote control.
1 Select the channel to be recorded
Press number buttons on the remote control or the CH 
or 
button.
2 Begin OTR
Press REC/OTR button on the TV/VCR as many times as needed. The recording length will be determined by the number of times you press REC/OTR button.
Each additional push will increase the recording time by 30 minutes. It is set up to 8 hours.
HINTS:
•Recording starts immediately when the REC/OTR button is pressed.
•When REC/OTR button is pressed 18 times, the TV/VCR will switch to the Normal Recording mode.
•To stop the OTR operation, press STOP button on the TV/VCR or on the remote control.
•To show the remaining time, press SELECT button repeatedly until "OTR" appears on the TV screen.
42