Timer Features | - 22 - |
number when changing channels or pressing RECALL.
1. Press | . |
2.Press CURSOR 
or 
and 
or 
to highlight the Channel I.D. Icon.
3.Press 
to display the Channel I.D. Menu.
4. Press CURSOR or , or use the Remote Control Keypad to enter the channel number you wish to assign a Channel Identifier.
5.Press CURSOR 
to highlight ENTER I.D.
6.Press CURSOR 
or 
to select first character in Channel Identifier. Then press
cursor 
to move cursor to the second position and repeat until the complete Channel Identifier is entered (up to 4 characters).
7.Press CURSOR 
or 
to highlight ENTER CHANNEL NUMBER. Then repeat steps 4 through 6 to continue adding Channel Identifier(s).
8.Press 
twice to exit menus.
NOTE: To delete a Channel I.D. (Station Identifier) from memory all four characters positions in the "ENTER I.D." area must display a dash mark
NOTE:
When the Maximum amount of channel identifiers are entered, "FULL" will be display in the caption position.
Timer Features
Sleep Timer
This feature is used for automatic turn off in 30, 60, 90 minutes. Display will flash 3, 2, and 1 to indicate the last three remaining minutes prior to turn off. The recall display will also appear.