REMOTE CONTROL BATTERY INSTALLATION AND REPLACEMENT

REMOTE CONTROL BATTERY INSTALLATION AND REPLACEMENT

1.Open the battery cover of the remote transmitter by pushing the notched part of the cover with your fingers.

2.Insert new "AA" size (SUM-3) batteries or equivalent for the Genius Remote. When replacing old batteries, push them towards the springs and lift them out.

3.Match the (+) and (-) marks in the battery compartment.

4.Replace the cover.

CAUTIONS

1.If your television set is to remain unused for a long period of time, for instance, when you go on a vacation, unplug the television set from the wall outlet.

2.Do not subject the Remote Transmitter to shocks such as dropping it on the floor, etc. Precision parts may be damaged.

3.Do not allow the Remote Transmitter to become wet and avoid placing it in areas of high humidity. Don't leave it on or near a heater. Excess heat or moisture may cause the unit to cease operation.

4.If the batteries become exhausted, Remote Control operation may become erratic or stop altogether. Replace the old batteries with fresh "AA" (SUM-3) types.

NOTES

1.When the power button is set to OFF, the OFF TIMER is released.

2.The channel No. indication, volume indication and OFF TIMER indication are not displayed simultaneously.

3.To operate your TV, point the Remote Transmitter at the remote sensor of the TV.

12