Hitachi 36SDX88B manual PC Mouse Control Operation, PC Audio Input Operation

PC MODE CONNECTION AND OPERATION

IMPORTANT: TURN POWER OFF ON THE TV/PC MONITOR AND THE PC BEFORE CONNECTING OR DISCONNECTING ANY CABLES.

PC MOUSE CONTROL OPERATION

1.Connect the 6 pin-din cable (provided) to the PC and monitor as shown on page 60.

2.Turn the TV/PC monitor power on.

3.Press the input button on the front panel or on the remote control until you select PC mode.

4.Turn the PC power on.

5.After the PC has completed booting, use the cursor buttons on the PC ready color TV front panel or on the remote control to

move the mouse cursor up/down/left/ or right to make selections. Use the channel down, channel up, C.S., and LST-CH buttons to perform other mouse functions (see page 60 through 62). ( , , , )

PC AUDIO INPUT OPERATION

1. Connect the audio output of the PC to the PC Audio Input on the TV/PC monitor as shown below.

PC AUDIO

INPUT

TV INPUT

TERMINAL

AUDIO OUTPUT

BACK OF PC

2.Turn the TV/PC monitor power on.

3.Press the input button on the front panel or on the remote control until you select PC mode.

4.Turn the PC power on.

5.Press volume up ( ) or down ( ) to increase or decrease the sound level.

6.Press the menu button on the TV/PC monitor front panel or on the remote control to display the PC on-screen display.

7.Press the right ( ) or left ( ) cursor buttons to select the audio menu .

8.Press the up( ) or down ( ) cursor buttons to access the audio adjustment functions.

NOTE: Make sure that the Remote Control is on TV Mode (not VCR or CABLE) when using the Cursor and Mouse control buttons.

63