ENGLISH
35
OTHER FUNCTIONS (continued)
Signal Check (Analog RGB mode)
Changes in the signal status are displayed on the screen as they arise.
Status Display Action
When Mode Display is set to
ON, the input signal is
switched or when the
RECALL button is pressed.
A guide is displayed for the
input terminal and the
horizontal and vertical sync
frequency.
When the sync signal is no
longer detected.
• A guide displays No Input
Signal, and Power Save
(for approx. 5 sec.)
• When the condition
continues where the sync
signal cannot be detected,
indicator lamp of power
source changes in orange
and the mode switches to
power save mode.
Recheck the personal
computer power switch
status and the
connection status.
When the input signal does
not match the monitor
specifications or is in an
unstable status.
A guide displays No Input
Signal.
Recheck the input
signal specifications.
Signal Check (TV/Video mode)
Changes in the signal status are displayed on the screen as they arise.
Mode Status Display Action
TV When the TV signal
is no longer
detected.
• A guide is displayed for
searching and counting down
2 minutes.
• If the TV signal cannot be
detected after 2 minutes, the
PDP TV will turn off directly
and indicator lamp is going to
red.
• Recheck the antenna
connection status.
• Reception other than
those of broadcasting
stations can be
considered.
Video When the sync.
signal is no longer
detected.
• A guide displays No Sync.
Signal in orange.
• Recheck the device
power switch status
and the connection
status.
• Recheck the device
connection status.
• Recheck the input
signal specifications.
Analog RGB
1024X768 60Hz
No Input Signal
Going to suspend
(Going to standby)
No Input Signal
Going to sleep
2 : 0 0
No Input Signal
Searching
(Video source name)
No Sync. Signal
HITACHI MODEL 42PD6000TA
Downloaded From TV-Manual.com Manuals