CABLE AND VCR CODES | - 25 - |
not turn off after 5 seconds, try a different 2 digit preset code. 4. The remote will now control your cable/satellite box.
NOTES:
1.If your cable/satellite box cannot be operated after performing the above procedures, this means that your cable/satellite box code has not been precoded into the remote.
2.In the unlikely event that your cable/satellite box cannot be operated after performing the above procedures, please consult your cable/satellite box operating guide.
3.The remote control will remember the codes you have programmed in until the batteries are removed from the remote control. After replacing the batteries repeat the entire programming procedure stated above.
4.If your cable/satellite box does not have a power function, the remote will issue the CHANNEL UP function.
5.The EXIT button will act as the cable/satellite box ENTER button if required.
6.The INPUT button will act as your cable/satellite box +100 button if required.
1 CABLE button
This button allows the remote to control your cable box by setting it to CABLE mode.
2 PRECODED CABLE/SATELLITE BOX buttons
These buttons transmit the chosen precoded CABLE/Satellite codes.
3 EXCLUSIVE TV buttons
These buttons are for operating the TV.
CABLE AND VCR CODES
CABLE BRAND | CODES | |
ABC |
| 01, 03, 05, 06, 09, 11, 12, 14, 30 |
Antronix |
| 44 |
Archer |
| 28, 40, 44 |
Belcor |
| 31 |
Cable Star |
| 31 |
Century |
| 40 |
Citizen |
| 40 |
Colour Voice |
| 19, 25 |
Comtronics |
| 29, 34 |
Contec |
| 15 |
Dae Ryung |
| 06 |
Eastern |
| 02 |
Electricord |
| 37 |
Everquest |
| 13 |
Focus |
| 57 |
Garrard |
| 40 |
GC Electronics |
| 31, 44 |
Gemini |
| 13, 32, 36, 46 |
General Instruments | 09, 51 | |