RGB ON SCREEN DISPLAY
76
INPUT LEVEL Select the Input Level voltage between 0.7V and 1.0V.
Horizontal Clock
Vertical Position
Horizontal Position
Auto Adjust
Setup
Move
SEL
Select
Input Level
Reset
Clock Phase
Black Side Panel
0
0
0
Reset
0.7V
Off
Adjust
0
Use THUMB STICK , to select between 0.7V and
1.0V depending on the amount of brightness in the
picture.
Others SVGA/XGA(4) VGA 480p 720p 1080i
X REAL REAL REAL(1) X X
NORMAL NORMAL NORMAL NORMAL(1) X X
FULL FULL FULL FULL(1) FULL(2,3) FULL(2,3)
ASPECT
MODE
AVAILABILITY
RGB (Analog) INPUT SIGNAL
For numbers in ( ), please see corresponding note below.
RGB ASPECT DISPLAY MODE.
NOTES: 1. Lack of raster can be seen in RGB when a 480p signal is input.
2. AUTOADJUST function (see page 74) is not available in 720p, 1080i, and 480p input signal.
3. FULLaspect mode, only 95% of information can be displayed (5% is treated as overscan).
4. 50” only.
The BLACK SIDE PANELfunction turns the gray side bars ON/OFF when watching Aspect
in Real and Normal signals in Standard Mode.
Press down on THUMB STICK to select BLACKSIDE
PANELON/OFF.
BLACK SIDE
PANEL
Horizontal Clock
Vertical Position
Horizontal Position
Auto Adjust
Setup
Move
SEL
Select
Input Level
Reset
Clock Phase
Black Side Panel
0
0
0
Reset
0.7V
Off
Adjust
0
NOTE: To prevent the plasma phosphor from burning when watching Aspect in Real and Normal signal, turn off the BLACK SIDE
PANEL. It is recommended to watch 4:3 signal with gray side bar.
Controls the motorized stand for 32”/42” displays.
Use THUMB STICK to rotate the TV to the right.
Use THUMB STICK to rotate the TV to the left.
Release the THUMBSTICK to stop rotation.
POWER SWIVEL
Move
SEL
Return
Power Swivel
USING THE RGB INPUT
NOTES: 1. The Power Swivel has a maximum turning radius of 30˚ (left and right).
2. Do not place any objects on the path of the monitor when using the power swivel feature.
3. Before using the power swivel feature, please make sure that the path of the monitor is clear of any fingers, hands
or any other body parts to avoid causing injury.