AUDIO SETTINGS

Use ADVANCED SETTINGS to improve the sound performance on the TV depending on listening conditions.

PICTURE

Press CURSOR or to highlight a function.

Press CURSOR to change the function setting.

Press EXIT to quit menu or CURSOR to return to previous menu.

MTS MODE

(Multi-Channel Television Sound) will allow you to select STEREO (a stereo broadcast), SAP (second audio program) which may be a secondary language, weather report, etc. or MONO (monaural sound) used when receiving a weak stereo broadcast.

The sources received will be displayed below the channel number. The source you select will be displayed to the left of the channel number. See example below for each selection when both stereo and second audio are received (monaural is always received).

PERFECT VOLUME

This function will automatically adjust volume so each channel has the same average volume level. (This function will be automatically set to off and cannot be turned on when HOME THEATER-DOLBY mode is selected.)

AUTO NOISE CANCEL

This function eliminates the noise in between stations. If a channel is tuned and is noisy, this function will automatically eliminate the audio for that channel.

DYNAMIC BASS

This function allows you to enjoy spectacular bass sound that would normally be heard only with expensive home speaker systems.

LOUDNESS

This function will improve the quality of both low and high frequency sounds when listening at low volume levels. (Enabling this function will automatically reset your

GRAPHIC EQUALIZER.)

INT. SPEAKERS

This function is useful when first setting up the external speakers, or if you prefer to use only speakers from a separate stereo system.

NOTE: If the optional left and right speakers are connected while in HOME THEATER- DOLBY NORMAL, the internal speakers may be turned off for better separation between the left, center, and right channels. The center channel audio will still be heard from the

68