USING THE REMOTE TO CONTROL SATELLITE RECEIVER FUNCTIONS
the remote control is programmed for your Satellite receiver. If the Satellite receiver does not turn off, try a different two digit preset code.
6. The remote will now control your Satellite receiver.
NOTES:
1.If your satellite receiver cannot be operated after performing the above procedures, your satellite receiver code has not been precoded into the remote.
2.In the unlikely event that your satellite receiver cannot be operated after performing the above procedures, please consult your satellite receiver operating guide.
3.The remote control will remember the codes you have programmed until the batteries are removed from the remote control. After replacing the batteries repeat the entire programming procedure stated above.
4.The INPUT button will act at the TV/SAT button when in SAT mode.
(1) SATELLITE (SAT) button
This button allows the remote to control your satellite receiver by setting it to SATELLITE mode.
(2) PRECODED SATELLITE RECEIVER buttons
These buttons transmit the chosen precoded cable codes.
(3) EXCLUSIVE TV buttons
These buttons are for operating the TV.
MY SATELLITE RECEIVER CODE IS:___________________
NOTE: Refer to instruction manual of the Satellite Receiver for operation of the buttons exclusively for the Satellite Receiver.
46