THEATER

SURROUND

The following surround settings will reproduce the "live" sound you would hear in concert halls, sports stadiums, movie theaters, etc. when you set up your speaker system as shown in the section on audio system setup on pages 20-21. The surround system is most effective with movie and other stereo material that is Dolby Surround encoded, and played on a stereo VCR.

When using WIRELESS SOUND, REAR SPEAKERS mode must be chosen to receive the SURROUND audio program.

To enter the SURROUND MODE, use THUMB STICK or to highlight then press down on THUMB STICK to select SURROUND MODE of your choice.

Now press THUMB STICK or to highlight, then press down on THUMB STICK to select speaker to be adjusted.

Use THUMB STICK or to adjust the volume of REAR and MAIN speakers. MAIN volume also controls AUDIO TO HI-FI output level. Adjust MAIN volume first.

Each SURROUND setting has separate MAIN and REAR volume controls, except OFF and DOLBY 3 STEREO which has no rear volume controls. DOLBY PRO LOGIC and DOLBY 3 STEREO also have CENTER volume controls, while MATRIX and HALL have BALANCE controls. (Balance while in DOLBY PRO LOGIC and DOLBY 3 STEREO modes is adjusted by using the TEST TONE volume controls. The CENTER and REAR volume will increase or decrease when MAIN is adjusted, keeping an equal balance between the SURROUND channels.

87