FRONT PANEL CONTROLS

selected. Check the Power Light to make sure the TV is turned off when not in use.

2.To see an auto-demonstration of the on-screen displays with HELP text displayed, press and hold the POWER button on the TV set for approximately five seconds. Press the POWER button on the TV again to end the auto- demonstration.

￿POWER light

You will see a red light when the TV is turned on.

￿AI (Artificial Intelligence) sensor

The artificial Intelligence sensor will make automatic picture adjustments depending on the amount of light in the room to give the best picture. (See page 58.)

￿REMOTE CONTROL Sensor

Point your remote control at this area when selecting channels, adjusting volume, etc.

￿MAGIC FOCUS

Use this button to adjust your picture quality to optimum performance. (See page 47.)

￿FRONT INPUT JACKS (for VIDEO: 3)

Use these audio/video jacks for a quick hook-up from a camcorder or VCR to instantly view your favorite show or new recording. Press the INPUT button until VIDEO: 3 appears in the top right corner of the TV screen. If you have mono sound, insert the audio cable into the left audio jack.

The front panel jacks are provided as a convenience to allow you to easily connect a camcorder or VCR as shown in the following examples.

NOTE:

1.Completely insert connection cord plugs when connecting to front panel jacks. If you do not, the played back picture may be abnormal.

2.If you have a S-VHS VCR, use the S-INPUT cable in place of the standard video cable.

3.If you have a mono VCR, insert the audio cable into the left channel jack of your TV.

15