English

5)Service

a)Have your power tool serviced by a qualified repair person using only identical replacement parts. This will ensure that the safety of the power tool is maintained.

PRECAUTION

Keep children and infirm persons away.

When not in use, tools should be stored out of reach of children and infirm persons.

ROTARY HAMMER SAFETY WARNINGS

1.Wear ear protectors.

Exposure to noise can cause hearing loss.

2.Use auxiliary handle(s), if supplied with the tool. Loss of control can cause personal injury.

3.Hold power tool by insulated gripping surfaces, when performing an operation where the cutting accessory may contact hidden wiring or its own cord. Cutting accessory contacting a "live" wire may make exposed metal parts of the power tool "live" and could give the operator an electric shock.

4.Do not touch the bit during or immediately after operation. The bit becomes very hot during operation and could cause serious burns.

5.Always hold the body handle and side handle of the power tool firmly. Otherwise the counterforce produced may result in inaccurate and even dangerous operation.

6.Wear a dust mask

Do not inhale the harmful dusts generated in drilling or chiseling operation. The dust can endanger the health of yourself and bystanders.

SPECIFICATIONS

Voltage (by areas)*

(110 V, 115 V, 120 V, 127 V, 220 V, 230 V, 240 V)

 

 

Power input

850 W*

No-load speed

0 – 850 min-1

Full-load impact rate

0 – 3700 min-1

Capacity: concrete

4 – 30 mm

steel

13 mm

wood

32 mm

Weight (without cord and side handle)

4.3 kg

*Be sure to check the nameplate on product as it is subject to change by areas.

STANDARD ACCESSORIES

 

(1)

Plastic case .................................................................

1

(2)

Side handle ................................................................

1

(3)

Stopper ........................................................................

1

(4)

Dust cup .....................................................................

1

(5)

Syringe ........................................................................

1

Standard accessories are subject to change without notice.

OPTIONAL ACCESSORIES (sold separately)

1. Drilling anchor holes (rotation + hammering)

Drill bit (Taper shank) and taper shank adapter

Drill bit (Taper shank)

Taper shank adapter

 

(SDS-plus shank)

 

 

Cotter

 

 

 

Outer diameter

 

 

 

 

 

 

 

 

11.0 mm

 

Taper mode

Applicable drill bit

 

12.3 mm

 

Morse taper (No.1)

Drill bit (taper shank)

 

11.0 ~ 17.5 mm

12.7 mm

 

 

 

 

 

 

Morse taper (No.2)

Drill bit (taper shank)

 

21.5 mm

14.3 mm

 

 

 

A-taper

Taper shank adapter formed A-taper or B-taper

14.5 mm

 

17.5 mm

 

 

is provided as an optional accessory, but the

 

B-taper

21.5 mm

 

drill bit for it is not provided.

 

 

 

 

7