14
STANDBY/ONINPUTKEYSTONERESET
LANP
TENP
POWER
1
Make sure that the power cord is firmly and
correctly connected to the projector and outlet
2Turn on the projector's power
Set the power switch to [ | ] (ON). The projector will go
to STANDBY mode and the POWER indicator will light to
solid orange.
3Press the STANDBY/ON button (control
panel or remote control)
• The projector begins warming up and the POWER
indicator blinks green.
• The POWER indicator stops blinking
and lights to solid green once the
projector's power is completely on.
4Remove the lens cap
The picture is projected.