48
FUNCTION (continued) M

ulti

Picture Mode (continued)

Table: Mix-and –Match of the Input Modes ( HDMI)

DTT TV AV1 AV2 AV3 AV4
HDMI1 O O O O O O
HDMI2 O O O O O O
HDMI3 O O O O O O

Activate the Multi Picture Mode in RGB Mode

When you activated the Multi Picture mode in RGB Input, the picture will be displayed at the mode which the Sub-screen
is displayed inside of the large screen (Main-screen).
ƔTo activated Multi Picture mode, press on the remote control.
The speaker icon indicates the following.
ƔThe audio sounds can be heard on the side with the speaker icon.
ƔWhen the speaker icon is on the Sub-screen
ƔChange channels.
ƔSwitch the Input modes ( DTT/TV, AV3~4 and HDMI1~3) on the Sub-screen.
(Main-screen is only for RGB Input.)
Input mode indication
Main-Screen (upper)
Sub-Screen (lower)
1. To shift the speaker icon , press button.
ƔThe speaker icon will be displayed in front of the Input mode i ndication.
2. To change the channel of the Sub-screen.
ƔMake sure that mark is located on the Sub-screen.
ƔPress to select channels.
3. To change the Input mode of the Sub-screen.
ƔMake sure that the speaker icon is located next to the Input mode indication of
the Sub-screen (lower).
ƔPress Input Select buttons on the remote control. (DTT/TV, AV3~4, and HDMI
1~3 are available)
4. To exit from the Multi Picture mode, press button.
RGB
1
(Sub-
Screen)
NOTE
xWhen operating Multi Picture mode, the “Power Save mode” is not available even though the Horizontal / Vertical Sync.
Signal ( or any kind of Video signal) has not input for certain period of time.
x The message “ Not Available” will be appeared on the screen when the combinations of the Input modes are not
acceptable.
(See the Table below for details.)

Table: Mix-and –Match of the Input Modes (RGB)

DTT TV AV3 AV4 HDMI1 HDMI2 HDMI3
RGB O O O O O O O
As for the available signals, please refer to "Recommended Signal List" on 57 ,58 .
Main Sub
Main Sub
(O: Available)
(O: Available)