54
TROUBLESHOOTING (continued)Symptom and Check List (continued)
Symptoms Check list
Page
ƔThe image on the screen is moving in an
oblique direction.
(PC input mode only)
ƔAdjust “Horizontal Clock” and “Clock
Phase”. 35
ƔThe coarse horizontal stripes could be
seen in full-display mode.
(PC input mode only)
ƔAdjust “Horizontal clock”. 35
ƔThe part of the image is lacking.
(PC input mode only)
AAAAA
ƔTry “Auto Adjust”. 35
ƔThe horizontal stripes are moving
vertically with flickering screen.
(PC input mode only)
ƔCheck the Signal status of the PC by
pressing Recall button on the remote
control.
35
ƔWhen the characters are displayed on the
whole screen, the vertical stripes appear
and some of the characters are blurred.
(PC input mode only)
abcdefgABCDEFGabcd
abcdefgABCDEFGabcd
ƔTry “Auto Adjust”.
ƔIf the display condition is not improved with
Auto Adjust, adjust “Horizontal Clock”.
35
ƔWhen the letter string is displayed in
full-screen, all of the characters on the
screen is blurred.
(PC input mode only)
abcdefgABCDEFGabcd
abcdefgABCDEFGabcd
ƔTry “Auto Adjust”.
ƔIf the condition is not improved with Auto
Adjust, adjust “Clock Phase” till you get
clearest image.
35
ƔWhen the small patterns are displayed on
the screen, the entire screen is flickering.
(PC input mode only)
ƔTry “Auto Adjust”.
ƔIf the condition is not improved with Auto
Adjust, adjust “Clock Phase” till you get
flicker-free display.
35
ƔImage cannot be displayed in the correct position.
(PC input mode only)
ƔPress button to check if input signal of
the displayed image is compatible with the
specification of the television.
51 ,35
ƔNo Picture or sound is output. (DTT mode only)
ƔIt might occur because it is tuned to digital
teletext channel.
ƔReturn to another channel.
45
ƔForgotten password. (DTT mode only)
ƔPress and hold down [Yellow],
[Blue] and buttons on the remote
control simultaneously for over 3 seconds
so that the password returns to the default
setting (0000).
44
ƔDue to the bad reception, block noise (DTT mode only)
ƔCheck the aerial system to improve signal
quality. 15
ƔLocal time displays incorrectly.
(DTT mode only)
ƔCheck if you select correct area in “Local
time” from “General setting”. 45