English
SAFETY — Continued
WARNING
5. NEVER POINT TOOL AT YOURSELF OR OTHERS IN WORK AREA.
Always assume the Nailer contains fasteners.
Never point the Nailer at yourself toward yourself or others, whether it contains fasteners or not.
If fasteners are mistakenly driven, it can lead to severe injuries. Never engage in horseplay with the Nailer.
Respect the Nailer as a working implement.
6.KEEP FINGERS AWAY FROM TRIGGER WHEN NOT DRIVING FASTENERS TO AVOID ACCIDENTAL FIRING.
Never carry the Nailer with finger on trigger since you could drive a fastener unintentionally and injure yourself or someone else.
Always carry the Nailer by the handle only.
7.ALWAYS WEAR EAR AND HEAD PROTECTION.
Always wear ear protection to protect your ears from loud noise.
Always wear head protection to protect your head from flying objects.
8.USE OUTSIDE OR
This Nailer exhausts carbon monoxide which are a danger to health when inhaled.
This Nailer shall not be used in enclosed or poorly ventilated areas.
Do not inhale.
9.OPERATE WITHIN PROPER TEMPERATURE RANGE.
The operating environment for this device is between 32°F (0°C) and 104°F (40°C) so ensure use within this temperature range.
The device may fail to operate below 32°F (0°C) or above 104°F (40°C).
10.STORE NAILER PROPERLY WITH FUEL CELL AND
BATTERY REMOVED.
| When not in use, the Nailer, fuel | |
| ||
120°F MAX | cell and battery should be store | |
in tool case and in a dry place. | ||
(50°C) | ||
| Store indoors at temperature | |
| below 120°F (50°C). | |
|
|
Keep the Nailer, fuel cell and battery out of direct sunlight and out of in a vehicle.
Keep out of reach of children. Look the atorage area.
11.KEEP WORK AREA CLEAN.
Cluttered areas invite injuries. Clear all work areas of unnecessary tools, debris, furniture, etc.
12.KEEP VISITORS AWAY.
Do not let visitors handle the Nailer.
All visitors should be kept safely away from work area.
13.DRESS PROPERLY.
Do not wear loose clothing or jewelry as they can be caught in moving parts.
Rubber gloves and nonskid footwear are recommended when working outdoors.
Wear protective hair covering to contain long hair.
14.CHECK PUSH LEVER BEFORE USE.
The Push Lever and Chamber operate in conjunction for this device.
Remove fuel cell and battery, and then make sure the push lever operates properly. (The push lever may be called “Safety”.) Never use the Nailer unless the push lever is operating properly, otherwise the Nailer could drive a fastener unexpectedly. Do not tamper with or remove the push lever, otherwise the push lever becomes inoperable.
Pull the Feeder knob with the device facing upward and press down the Push lever then confirm that the Push lever securely returns to its original position. The Push lever operation becomes especially heavy in low temperatures and drive operations may not function.
15.KEEP ALL SCREWS AND COVERS TIGHTLY IN PLACE.
Keep all screws and covers tightly mounted. Check their condition periodically.
Never use the Nailer if parts are missing or damaged.
16.DO NOT LOAD FASTENERS WITH TRIGGER OR PUSH LEVER DEPRESSED.
When loading fasteners into the Nailer,
1)do not depress the trigger;
2)do not depress the push lever; and
3)keep the Nailer pointed downward.
17.KEEP FACE, HANDS AND FEET AWAY FROM FIRING HEAD DURING USE.
Never place your face, hands or feet closer than 8 inches (200 mm) from the firing head.
A serious injury can result if the fasteners are deflected by the workpiece, or are driven away from the point of entry.
— 5 —