English
SAFETY — Continued
WARNING
10.STORE NAILER PROPERLY WITH FUEL CELL AND BATTERY REMOVED.
When not in use, the Nailer, fuel cell and battery should be store in tool case and in a dry place.
Store indoors at temperature below 120°F (50°C).
Keep the Nailer, fuel cell and battery out of direct sunlight and out of in a vehicle. Keep out of reach of children. Look the storage area.
11.KEEP WORK AREA CLEAN.
Cluttered areas invite injuries. Clear all work areas of unnecessary tools, debris, furniture, etc.
12.KEEP VISITORS AWAY.
Do not let visitors handle the Nailer.
All visitors should be kept safely away from work area.
13.DRESS PROPERLY.
Do not wear loose clothing or jewelry as they can be caught in moving parts. Rubber gloves and nonskid footwear are recommended when working outdoors. Wear protective hair covering to contain long hair.
14.CHECK PUSH LEVER BEFORE USE. The Push Lever and Chamber operate in conjunction for this device.
Remove fuel cell and battery, and then make sure the push lever operates properly. (The push lever may be called “Safety”.) Never use the Nailer unless the push lever is operating properly, otherwise the Nailer could drive a fastener unexpectedly. Do not tamper with or remove the push lever, otherwise the push lever becomes inoperable.
Pull the Feeder knob with the device facing upward and press down the Push lever then confirm that the Push lever securely returns to its original position.
The Push lever operation becomes especially heavy in low temperatures and drive operations may not function.
15.KEEP ALL SCREWS AND COVERS TIGHTLY IN PLACE.
Keep all screws and covers tightly mounted. Check their condition periodically.
Never use the Nailer if parts are missing or damaged.
16.DO NOT LOAD FASTENERS WITH TRIGGER OR PUSH LEVER DEPRESSED. When loading fasteners into the Nailer,
1)do not depress the trigger;
2)do not depress the push lever; and
3)keep the Nailer pointed downward.
17.KEEP FACE, HANDS AND FEET AWAY FROM FIRING HEAD DURING USE. Never place your face, hands or feet closer than 8 inches (200 mm) from the firing head.
A serious injury can result if the fasteners are deflected by the workpiece, or are driven away from the point of entry.
18.PLACE NAILER PROPERLY ON WORKPIECE.
Do not drive fasteners on top of other fasteners or with the Nailer at too steep of an angle; the fasteners can ricochet and hurt someone.
19.DO NOT DRIVE FASTENERS INTO THIN BOARDS OR NEAR CORNERS AND EDGES OF WORKPIECE.
The fasteners can be driven through or away from the workpiece and hit someone.
20.NEVER DRIVE FASTENERS FROM BOTH SIDES OF A WALL AT THE SAME TIME. The fasteners can be driven into and through the wall and hit a person on the opposite side.
7