TIME LAPSE RECORDING

TIME LAPSE RECORDING

This function is convenient to record the blooming of flowers, etc. as it starts and stops recording at a predetermined interval.

For example, this function allows recording for one second after a pause of 30 seconds and repeats this procedure.

1.In the record/pause (stand-by) mode, press "SELF TIMER/TIME LAPSE" button repeatedly until the length of time you want between recordings appears in the viewfinder.

• The display is changed from "SELF 30REC 0:10" to "SELF RECORD 0:10", "INTERVAL 0:30 (30 seconds)" "INTERVAL 1:00 (1 minute)", "INTERVAL 2:00 (2 minutes)", "INTERVAL 5:00 (5 minutes)", "INTERVAL MAN (Manual)" and again to "SELF 30REC 0:10" every time the button is pressed.

2.Press the record start/stop or "STILL (REC/PAUSE)" button.

•The clock starts counting, and when it reaches "0:00", a recording is performed for one second, and then the record/pause (stand-by) mode is entered. After 30 seconds, recording is repeated for another second.

3. Press the record start/stop or "STILL (REC/PAUSE)" button to stop recording.

NOTES:

• Do not continue to interval record for more than 48 hours.

56