
TROUBLESHOOTING
TROUBLESHOOTING
Your camera/recorder is a highly sophisticated instrument. It has been carefully checked and adjusted at the factory under the most rigid quality control and inspection systems. However, should problems develop, check the following points and take the necessary corrective measures.
INSERTING OR REMOVING THE CASSETTE
INSERTING OR REMOVING THE CASSETTE
Check Point & Correction
Connect the power source.
Load cassette in direction indicated by arrow on cassette.
Cassette window must be toward outside.
Check Point & Correction
Picture does not appear in the viewfinder. *Remove the lens cap. *Set "POWER" switch to "CAM".
The camera/recorder can not go into the recording mode, even when record start/stop button is pressed.
*The cassette has had the erase prevention tab removed. Stick a piece of cellophane tape over
the erase prevention hole or select a different cassette.
Picture is out of focus. | *The camera/recorder is set to |
| MACRO mode. |
Release the MACRO mode, and | |
| then focus on the object. |
| |
| wide angle or telephoto lens is |
attached. | |
BATTERY CONDITION |
|
Symptom | Check Point & Correction |
86