DATE/TIME Setting

button.

6.Press "F.FWD" or "REW" button as many times as may be required to select the correct hour, and then press "STOP/EJECT" button.

7.Repeat step 6 to select minute and AM/PM.

8.After setting AM or PM, press "DATE/TIME" button to change the display and start the internal clock. It is recommended that you press "DATE/TIME" button to match the time signal.

9.Press "DATE/TIME" button after setting the clock. The display will change as follows each time the button is pressed.

NOTE: The date/time graphics will be recorded whenever they appear in the viewfinder.

￿To correct date/time information after starting the date/time

1.Press and hold "DATE/TIME" button, and then press "STOP/EJECT" button. The month starts flashing.

2.Correct the incorrect digit by using "F.FWD", "REW" and "STOP" buttons.

￿To correct date/time information during programming

Press "STOP/EJECT" button repeatedly until the digit that is incorrect flashes. Correct the incorrect digit by using "F.FWD", "REW" and "STOP/EJECT" buttons.

31