TROUBLESHOOTING

TROUBLESHOOTING

Your camcorder is a highly sophisticated instrument. It has been carefully checked and adjusted at the factory under the most rigid quality control and inspection systems. However, should problems develop, check the following points and take necessary corrective measures.

INSERTING OR REMOVING THE CASSETTE

 

Symptom

Check Point & Correction

 

 

 

 

 

Cassette holder cannot be opened when you

Connect the power source.

 

press “STOP/EJECT”.

 

 

 

 

 

 

 

Cassette cannot be inserted into cassette

Load cassette in the direction indicated by arrow

 

compartment.

on cassette.

 

 

 

 

 

 

Cassette window must be toward outside.

 

 

 

 

.

 

 

 

CAMERA RECORDING

 

 

 

 

 

 

Symptom

Check Point & Correction

 

 

 

 

Picture does not appear in the viewfinder.

Remove the lens cap.

 

 

 

 

 

Set “CAM/OFF/VIDEO” to “CAM”

 

 

 

 

The camcorder can not go into the recording

The cassette has had the erase prevention tab

 

mode, even when “REC/PAUSE” button is

removed. Stick a piece of cellophane tape over

 

pressed.

the erase prevention hole or select a different

 

 

cassette.

 

 

 

 

Picture is out of focus.

Auto-focus does not operate if the wide angle or

 

Auto-focus does not operate.

telephoto lens is attached.

 

 

 

 

 

 

 

 

 

.

 

 

RECORDING TV PROGRAMS OFF THE AIR

 

 

 

 

 

 

Symptom

Check Point & Correction

 

 

 

 

The camcorder can not go into the recording

The cassette has had the erase prevention tab

 

mode even when “REC/PAUSE” button is

removed. Stick a piece of cellophane tape over

 

pressed.

the erase prevention hole or select a different

 

 

cassette.

 

 

 

 

 

Set “CAM/OFF/VIDEO” to “CAM” position.

 

 

 

 

 

Connect the camcorder and TV (or VCR).

 

 

 

 

 

Set “AV OUT/IN” to “IN” position.

 

 

 

 

 

 

 

 

 

BATTERY CONDITION

 

 

56