Getting Started

Loading Batteries

Install the batteries to prevent misplacing them.

Date/Title Battery

1.Pull out the battery holder.

2.Insert the date/title battery with the "+" terminal facing up.

3.Fully insert the battery holder into the camcorder.

Remote Control Battery

(The remote control and the battery are optional for VM-E110A)

1.Push the tab to the left of the remote control and hold it, then remove the battery holder.

2.Insert the battery with the "+" terminal facing up as shown in the figure above.

3.Replace the battery holder with battery in the remote control making sure that it is full inserted.

WARNING: KEEP THE BATTERIES AWAY FROM CHILDREN AND PETS. IF SWALLOWED CONSULT A PHYSICIAN IMMEDIATELY FOR EMERGENCY TREATMENT.

19