Advanced Techniques
Controlling Your TV with the Camera/Recorder
The remote control is designed to be compatible with many televisions, but will not work with every one made. If your TV does not respond the way it should when you program it as explained below, this remote may be incapable of operating it.
Once you have programmed the remote, you won't have to do it again until you change the batteries.
This remote control can be used with your TV as well as the camera/recorder, as long as your TV comes with a remote control. This feature comes in handy
The remote control is compatible with the fourteen makers of TVs listed below
Every TV that comes with a remote control is set up to detect certain infrared signals. You need to program the camera/recorder remote control to send signals that your TV will recognize and respond to. Here's what to do:
Programming the Remote Control
•Turn the television on (any channel is okay).
•Aim the camera/recorder's remote control at your TV set. Hold down the CH (
) button while you press the button corresponding to your brand of television as shown in the chart (page 41).
For example, if you have an RCA television, press CH (
) and DISPLAY at the same time. If this button combination sends a signal that matches with your TV, the channel will change on the TV, and you'll know the remote is set to control the television.
•If that button combination does not change the TV channel, go through the whole list of button combinations one by one until you find one that does change your TV channel. Also, if your brand of TV is not listed in the chart, try all the buttons. One of them may work for you.
If the TV channel still doesn't change after going through all the button combinations listed, it is likely that you will not be able to program this remote control for your TV.
TV Brands | Press CH ( ) and This Button |
Hitachi | AVX |
Zenith | VOL ( ) |
Sony | CH ( ) |
Magnavox | REW |
Sanyo | PLAY |
Gold Star 1 | F.FWD |
Toshiba | AV DUB |
52