General Maintenance
PLAYBACK OF
PLAYBACK OF
Symptom | Check Point & Correction |
|
“PLAY” button cannot be engaged. | Set the power switch to “VIDEO” |
|
| position. |
|
No picture appears on television | Set the television to the |
|
screen when “PLAY” button is pressed. | camera/recorder channel (3 or 4) |
|
| depending upon the selected channel |
|
| in the RF channel select switch of RF |
|
| output adapter. (TV is connect to the |
|
| camera/recorder by using RF output |
|
| adapter.) |
|
Interference on playback picture. | When you see the playback picture on |
|
| yourTV, adjust fine tuning knob on |
|
| television set to obtain best picture. |
|
Picture bends at the top of the TV | TV receiver is older type. It needs to |
|
screen. | be modified to work properly with |
|
| camera/recorder. |
|
| Tape is damaged, try another cassette. |
|
Color of your TV screen is too bright, | TV set has VIR circuit. Turn off during |
|
too faint or change. | playback. |
|
|
| |
DEW |
| |
|
|
|
Symptom | Check Point & Correction |
|
“DEW” indication flashes in the | Condensation on the camera/recorder |
|
viewfinder. | mechanism – wait until the unit has |
|
| reached normal room temperature and |
|
| condensation has dried. “DEW” |
|
| indication will then stop flashing. |
|
|
| |
BATTERY CONDITION |
| |
Symptom | Check Point & Correction |
|
The " " indication in the electronic | Try another battery or charge the |
|
viewfinder | battery. |
|
|
|
|
NO OPERATION IS ACCEPTED |
|
|
Symptom | Check Point & Correction |
|
Power is not turned on an no button | Remove the power source, and after |
|
operations are accepted. | about one minute, push the reset |
|
| switch gently using a toothpick, etc. |
|
| until you feel a click. The display will |
|
| be reset. Then set the information |
|
| again. |
|
59