Getting Started

use a polarized cord or outlet accessory.

2.Align the arrow on the external power adapter with the guide arrow on the camera/recorder.

3.Hold the external power adapter firmly against the camera/recorder while sliding it towards the right of the machine.

4.Connect the external power adapter plug to the DC OUTPUT jack of the AC adapter/charger.

Note: The AC adapter/charger can be used around the world. An AC plug adapter is required in some foreign countries. If you need one purchase it at your Hitachi distributor.

Note: The battery level indicator sometimes displays partial charge symbol when using the AC adaptor/charger. Ignore this indicator when using the AC adaptor/charger.

Using Alkaline Dry-Cell Batteries

The camera/recorder can be powered with six alkaline dry-cell batteries inserted into the optional battery case (Hitachi VM-BP86C) which can be attached to the camera/recorder. The operation time of the camera/recorder depends on the type of alkaline batteries used. Please ensure that the CAMERA/OFF/VIDEO switch is in the OFF position whenever attaching or detaching any power supply (ie. battery, AC adapter/charger, etc.)

Alkaline Battery Case Diagram

1.Insert six "AA" alkaline dry-cell batteries as shown, being sure not to confuse their polarity.

2.Align the arrow on the battery case with the guide arrow on the camera/recorder.

3.Hold the battery case firmly against the camera/recorder while sliding it towards the right of the machine.

Note: At extremely low temperatures operation time decreases, while at high temperatures these batteries may be damaged.

Note: Ordinary manganese batteries cannot be used.

Note: Attach the battery case immediately before you start recording.

22