Advanced Techniques
contains two lines of up to 16 characters per line. The camera/recorder contains 47 different characters for creating a title.
Titler Buttons
Creating a Title
1.Connect the camera/recorder to a power source.
2.Hold down the red button on the CAMERA/OFF/VIDEO switch and slide it to either CAMERA or VIDEO.
3.Press the TITLE ON/OFF button on the remote control and a flashing cursor appears in the viewfinder.
4.Use the STOP button to place the cursor where you wish to begin your title.
5.Use the F.FWD and REW/REVIEW buttons to select the first character of your title.
6.Once you've selected a character press the STOP button to set it.
7.Complete the title by repeating steps 5 and 6.
8.When you complete your title, press PLAY to create a second title as required, or press the TITLE ON/OFF button on the remote control to store the title in memory and remove the title graphics from the viewfinder.
Note: As long as the correct current time can be displayed, the title is held in memory.
Correcting Errors
1.Press the TITLE ON/OFF button on the remote control.
2.Select the title with the PLAY button.
3.Use the STOP button to select the character to be corrected.
4.Use the F.FWD and REW/REVIEW buttons to correct the character.
42