General Maintenance
PLAYBACK OF
SYMPTOM | CHECK POINT & CORRECTION |
|
“PLAY” button cannot be engaged. | *Set the CAMERA/OFF/VIDEO switch |
|
| to VIDEO |
|
No picture appears on television | Set the television to the |
|
screen when “PLAY” is pressed. | camera/.recorder channel (3 or 4) |
|
| depending upon the selected channel |
|
| in the RF channel. |
|
(TV is connected to the camera/recorder by using RF output adapter. |
| |
| When you see the playback picture on |
|
| your TV, adjust fine tuning knob on |
|
| television set to obtain best picture. |
|
Picture bends at the top of the TV | TV receiver is older type. It needs to |
|
screen. | be modified to work properly with |
|
| camera/recorder. |
|
| Tape is damaged try another cassette. |
|
Color of your TV screen is too bright, | TV set has VIR circuit. Turn it off |
|
too faint or change. | during playback. |
|
BATTERY CONDITION
SYMPTOM | CHECK POINT & CORRECTION |
The ( ) indication in the electronic viewfinder | Try another battery or charge the battery. |
flashes to indicate the battery is discharged. |
|
. |
|
NO OPERATION IS ACCEPTED |
|
SYMPTOM | CHECK POINT & CORRECTION |
Power is not turned on and no button | Remove the power source and after about |
operations are accepted | one minute, push the reset switch gently using |
| a toothpick, etc, until you feel a click. The |
| display will be reset. Then, set the |
| information again. |
TAPE DISPLAY |
|
SYMPTOM | CHECK POINT & CORRECTION |
Tape appears in the viewfinder. | Have you moved the camera from a cold |
| place to a warm place so that its temperature |
| changed abruptly? If the temperature has |
| changed, remove the cassette and set the |
| CAMERA/OFF/VIDEO switch to OFF, then |
| wait for about one hour. |
| Remove the cassette and then try to reinsert, |
| remove it several times. If the indication is |
| still shown in the viewfinder, use a cleaning |
| tape clean the heads and replace the |
| cassette. |
51