General Maintenance
pg. 51
- 55 -
Picture bends at the top of the TV screen. | TV receiver is older type. It needs to be |
| modified to work properly with |
| camera/recorder. |
| Tape is damaged. Try another cassette. |
Color of your TV screen is too bright, too faint | TV set has VIR circuit. Turn it off during |
or change. | playback. |
BATTERY CONDITION |
|
SYMPTOM | CHECK POINT & CORRECTION |
The ( ) indication in the electronic viewfinder | Try another battery or charge the batteries. |
flashes. |
|
NO OPERATION IS ACCEPTED |
|
SYMPTOM | CHECK POINT & CORRECTION |
Power is not turned on and no button operations | Remove the power source, and after about one |
are accepted. | minute, push the reset switch gently using a |
| toothpick, etc. until you feel a click. The |
| display will be reset. Then set the information |
| again. |
TAPE DISPLAY |
|
SYMPTOM | CHECK POINT & CORRECTION |
TAPE appears in the viewfinder. | Have you moved the camera/recorder from a |
| cold place to a warm place so that its |
| temperature changed abruptly? If the |
| temperature had changed, remove the cassette |
| and set CAMERA/OFF/VIDEO switch to OFF, |
| then wait for about one hour. |
| Remove the cassette and then try to reinsert, |
| remove it several times. If indication is still |
| shown in the viewfinder, use a cleaning tape to |
| clean the heads and replace the cassette. |
55