Getting Started, Identifying Controls

- 21 -

Correcting the Date and Time

1.Press the DATE/TITLE button while pressing the STOP button. The flashing cursor appears at the month.

2.Move to where you need to make the correction with the STOP button and use the F.F and REW to correct.

3.Press the DATE/TITLE button to set the corrected date and time.

Getting Started, Identifying Controls

Left side/Rear Camera Illustration

1. Lens

F1.6 (4~48mm) 12:1 power zoom lens with auto focus and auto iris functions.

2.Electronic Viewfinder

3.PUSH OPEN Button

Push this button to open the LCD monitor.

4. Speaker

You can listen to the recorded sound.

5.Microphone

6.Record Indicator

This indicator lights when the camcorder is recording.

7. Infrared Receiver

The area where infrared signals from the wireless remote are received. Aim the remote control to this area for best results.

8. Cassette Holder Close Button

CAUTION: Be sure to press this button to close the cassette holder. Otherwise, the tape may become slack and may be damaged.

9. Cassette Holder

A power source must be connected to the camcorder before a cassette can be inserted or removed.

10. EJECT Switch

A power source must be connected before cassettes can be inserted or removed though the CAM/OFF/VIDEO switch may be set to OFF ("Inserting and Removing Cassettes," p18)

iii11. LCD Monitor

You can view the pictures as they are being recorded and play them back immediately after recording on the 3-inch LCD screen.

12. BRIGHT Control

Use this to adjust the brightness of the LCD monitor screen ("Adjusting the Brightness of the LCD Screen", p25).

13. EIS (Electronic Image Stabilizer) Button

EIS corrects the slight shaking of an image ("Using the Electronic Image Stabilizer," p37).

14. 16x9 button

With this button the picture format can be switched from 4:3 (picture format of a normal TV set) to 16:9 ("Using 16x9", P39).

15. DATE/TITLE (DISP.) Button

Use this button to record the date, time and title on your tape. Any time that the date, time and title displays appear in the viewfinder, they are recorded on your tape. This button can be used instead of DISPLAY button on the remote control in the VIDEO mode.

Note: Be sure to insert the clock battery before setting the date and time or creating a title.

Right side/Battery cover Illustration

16. Ring of Tape Transport

- F.F Button

Use this button to fast forward tapes or for visual search. During visual search the camcorder fast forwards at