Advanced Techniques
2.Use the STOP button to select the character to be corrected.
3.Use the F.FWD and REW buttons to correct the character.
4.Press the TITLE ON/OFF button on the remote control to store the corrected title in memory.
Recording Title on a Tape in the Camcorder
1.Hold down the red button on the CAM/OFF/VIDEO switch while sliding the switch to CAM.
2.Locate the point of the tape where you wish to record the title ("Using Quick Edit," p40).
3.Press the TITLE ON/OFF button on the remote control.
4.Press the Start/Stop button to start recording the title.
5.Press the TITLE ON/OFF button on the remote control to stop recording the title. The title graphics disappear from the viewfinder or LCD monitor and the camcorder can record normally.
Note: Create and store your title before an event you plan to record. Just press the TITLE ON/OFF button on the remote control to superimpose the title over the scene as you record it. This method avoids erasing previously recorded material which will happen when you record a title on a previously recorded tape.
Recording a Created Title while Transferring a Tape
1.Connect the camcorder to the VCR (p30).
2.Turn on the VCR and set it to record. Hold down the red button on the CAM/OFF/VIDEO switch while sliding the switch to VIDEO. Press PLAY on the camcorder.
3.Press the TITLE ON/OFF button on the remote control at the point on the tape where you wish to record the title.
4.Press the TITLE ON/OFF button on the remote control again to stop recording the title.
Note: Recording the title during tape transfer will erase a portion of your recorded material.
Dubbing from the Camcorder to a VCR
Connect the camcorder to a VCR to copy your or a friend's home 8mm recordings to VHS.
53