VIEWING THE PICTURE PLAYED BACK ON YOUR TV

VIEWING THE PICTURE PLAYED BACK ON YOUR TV

To play back a tape recorded on your camera/recorder and view it on your TV receiver, you must connect the camera/recorder to the TV receiver using either AV stereo output cord (provided) or RF output adapter (provided).

Example 1: If your TV is already connected to the VCR,

1.Connect the AV stereo output cord (provided) to "AUDIO IN" and "VIDEO IN" of your VCR.

NOTES:

•If your VCR has a single (mono) audio input, connect either the left or right audio plug to the audio input of the VCR.

•If your VCR has an "S-VIDEO IN" jack, connect the "S-VIDEO" plug (black) to the VCR instead of the "VIDEO IN" plug (yellow)

2.Connect the other end to the AV stereo output cord to "AV IN/OUT" of your camera/recorder.

3.Select the "LINE" of your VCR.

4.Slide "EJECT" switch on the camera/recorder and then insert the cassette.

5.Slide the power switch to "VIDEO".

6.Press "PLAY" button.

7.After playing press "STOP" button.

Example 2: If your TV has "VIDEO IN" and "AUDIO IN" jacks,

64