Symptom
“PLAY” button cannot be engaged.
No picture appears on television screen when “PLAY” button is pressed.
Interference on playback picture.
Picture bends at the top of the TV screen.
Color of your TV screen is too bright, too faint or change.
PLAYBACK OF

General Maintenance

tab on the recording mode, even when

cassette. See page

22 for details.

 

the Start/Stop button on the

* Set the

CAM/OFF/VIDEO switch camera/recorder is pressed.

to

CAM.

 

PRE-RECORDED CASSETTE

Check Point & Correction

Set the power switch to “VIDEO” position.

Set the television to the camera/recorder channel (3 or 4) depending upon the selected channel in the RF channel select switch of RF output adapter. (TV is connect to the camera/recorder by using RF output adapter.)

When you see the playback picture on yourTV, adjust fine tuning knob on television set to obtain best picture.

TV receiver is older type. It needs to be modified to work properly with camera/recorder.

Tape is damaged, try another cassette.

TV set has VIR circuit. Turn off during playback.

BATTERY CONDITION

Symptom

Check Point & Correction

The " " indication in the electronic

Try another battery or charge the

viewfinder

battery.

NO OPERATION IS ACCEPTED

Symptom

Check Point & Correction

Power is not turned on an no button

Remove the power source, and after

operations are accepted.

about one minute, push the reset

 

switch gently using a toothpick, etc.

 

until you feel a click. The display will

 

be reset. Then set the information

 

again.

59