Before You Begin
NOTE: The plug can easily be inserted and pulled out when the post on the cover is inserted into the hole.
NOTE: Release the post from the hole to close the jack cover.
3.To close the jack cover, Press the two sections marked "PUSH" and make sure that a click is heard. Also check that the knob is aligned with the mark as shown in the figure below.
To Prevent Condensation
When the camcorder is moved from a cold place to a warm place, leave it for a while until it reaches the ambient temperature before opening the case.
Be careful that no water droplets or snow flakes enter when opening the case. If they enter, the humidity inside rises and condensation is likely to occur.
Moisture also condenses on the lens. If moisture condenses on the lens, clear pictures cannot be recorded.
If condensation occurs on the lens, open the case. After the condensation disappears, use the camcorder.
Open the case if there is condensation. Otherwise, it is hard to dry the camcorder.
It is recommended that you store the camcorder in a box with a desiccant.
16