Getting Started
run.
Note: When the remaining tape time becomes less than about three minutes, TAPE END flashes in the viewfinder.
Lens Cap
Attach the lens cap to protect the lens when carrying or storing the camcorder. During shooting attach the lens cap as shown in the figure to prevent it from being lost.
Using the Microphone Cap
6Be sure to attach the microphone cap if you rinse the camcorder with water after using it. If water pressure is applied to the microphone directly, it could cause damage to the microphone.
Position the microphone cap as shown in the figure and put it on the microphone securely until a click is heard.
Attaching the Terminal Cover
The terminal cover protects the terminal at the bottom of the camcorder from damage, dirt, dust, etc.
Attach the terminal cover if you are not using the external power cord.
NOTE: Before attaching the terminal cover, check that there is no sand, water or dirt adhering to the terminal. If anything adheres to the terminal, use the brush (provided) or a soft cloth to wipe it off completely.
29