Basic Techniques
the optical receiver will light (red) to show that the receiver is in the standby mode.
Operations
1.Make sure that the power lamp of the AV optical receiver lights (red) to show that the receiver is in the
2.Turn the TV on and select video input.
3.Connect a power source to the camcorder and insert a recorded cassette.
4.Set the CAM/OFF/VIDEO switch to "VIDEO" and point the camcorder's transmitter at the AV optical receiver.
When the AV optical receiver senses a signal from the camcorder, the power lamp of the receiver changes to green to show that the receiver is in the power on mode.
Note: When the CAM/OFF/VIDEO switch of the camcorder is set to "CAM", no signal can be transmitted.
5.Press the PLAY button. Now, the playback picture appears on the TV screen.
Note: When you use the remote control to operate the camcorder, point it at the infrared receiver of the camcorder. You cannot operate the camcorder by pointing the remote control at the AV optical receiver.
6.When playback is finished, set the CAM/OFF/VIDEO switch of the camcorder to "OFF". After approx. 20 seconds, the power lamp of the AV optical receiver changes to red to show that the receiver has entered the
Controllable Range
*Lift the fitting at the bottom of the camcorder; it can be used as a simple stand.
Note: The stand is likely to slip and may fall down even with a slight impact, so be careful when selecting the position where the camcorder is to be installed using the stand.
38