General Maintenance
PLAYBACK OF
Symptom | Check Point & Correction |
“PLAY” button cannot be engaged. | Set the power switch to “VIDEO” |
| position. |
No picture appears on television | Set the television to the |
screen when “PLAY” button is pressed. | camera/recorder channel (3 or 4) |
| depending upon the selected channel |
| in the RF channel select switch of RF |
| output adapter. (TV is connect to the |
| camera/recorder by using RF output |
| adapter.) |
Interference on playback picture. | When you see the playback picture on |
| yourTV, adjust fine tuning knob on |
| television set to obtain best picture. |
Picture bends at the top of the TV | TV receiver is older type. It needs to |
screen. | be modified to work properly with |
| camera/recorder. |
| Tape is damaged, try another cassette. |
Color of your TV screen is too bright, | TV set has VIR circuit. Turn off during |
too faint or change. | playback. |
| |
BATTERY CONDITION | |
Symptom | Check Point & Correction |
The " " indication in the electronic | Try another battery or charge the |
viewfinder | battery. |
NO OPERATION IS ACCEPTED |
|
Symptom | Check Point & Correction |
Power is not turned on an no button | Remove the power source, and after |
operations are accepted. | about one minute, push the reset |
| switch gently using a toothpick, etc. |
| until you feel a click. The display will |
| be reset. Then set the information |
| again. |
61