Recording will start and the REC indictor on the VCR will appear.
Notes:
•Recording will not start unless the cassette has the safety tab in place. When a cassette without a safety tab is inserted, "TAb" will flash in the VCR display for several seconds and the cassette will be ejected automatically.
•Press the PAUSE button to set the VCR to the recording pause mode.
Press the button again to
•If you stay in PAUSE mode for more than 5 minutes, the VCR automatically switches to STOP mode to protect the tape.
6 Press the STOP button to finish recording.
RECORDING A PROGRAM
To watch one program while recording another
1Once you have set the VCR for recording, press the VCR/TV button.
The VCR indicator disappears. Now, you will be viewing through your TV only.
2Switch channels using your TV controls or the VCR remote, if it's programmed to control your TV (see page 54).
Remote Control Illustration.
Notes:
•You can check on the recording by pressing VCR/TV again. This will switch you back to viewing through the VCR, and you'll see the program you are recording.
•If you're hooked up with an audio/video cable: Switch the TV from AUX or VIDEO mode back to the TV
43